EZ Curl Barbell 4ft (Black Oxide/Chrome)
The curved shaft of the ATE EZ Curl Bar helps to reduce strain on the wrists during curls. If you love training arms, ATE EZ Curl Bar (Black Oxide/Chrome) is specifically designed for you, to target and isolate the biceps, triceps and forearm muscles.
It comprises of the ATE unique ball bearing system with 2 Needle Ball Bearings for smooth rotation while lifting. This bar is our incredible deal for CrossFit boxes, Conventional gyms and Olympic weightlifting gyms.
- Strength rating at 45,000 PSI
- Black Oxide Finish
- Weight – 10 kg
- Grip – 28 mm
- Sleeve diameter – 50mm
- Length – 1.20 meters
- 1.2mm Diamond Knurl
- 2 Needle Bearings
- No Whip
相关产品
Fractional Plates
Fractional plates, also referred to as micro plates or change plates, are used for making small increments in lifts to accumulate small and consistent weight gains.
Available in five different increments from 0.5kg to 2.5kg, these are essential for incrementing load and to help you hit your percentages with accuracy. With smooth raised edges to protect and preserve your quality bumpers and bars, our Fractional Plates fit perfectly with your existing plates.
SPECIFICATIONS
Weight 0.5KG, 1KG, 1.5KG, 2KG, 2.5KG
Material Rubber
Color Various
Olympic Barbell Weightlifting 15kg (Women’s)
The TESIRO Weightlifting competition olympic barbell 15kg is made from a special steel alloy. The bar is built according to the IWF Specifications and comes with lifetime warranty against bending!
It comprises of the Nothing can beat the durability of the classic silver hard chrome finish and the great performance of our bar makes it an ideal choice in your professional setup. It comprises of the TESIRO unique bearing system with 8HK Needle Bearings.
- Strength rating at 200,000 PSI
- Weight - 15 kg
- Grip - 25 mm
- Sleeve diameter - 50mm
- Length - 2.01 meters
- 1.2mm Diamond Knurl
- Single International Weightlifting Knurl Mark
- Good Whip
Powerlifting Barbell 20kg (IPF Specifications)
The TESIRO powerlifting barbell is made from special steel alloy. The TESIRO Powerlifting Barbell is made according to IPF Specifications and thus is used in professional powerlifting setups all over the country.
You can read the full review of the TESIRO Powerlifting Barbell 20kg India!
The 1.5mm Volcano Knurl with the IPF knurl mark makes the TESIRO Powerlifting Barbell suitable for all national competitions and training. It comprises of the TESIRO signature bushing system.
- Strength rating at 200,000 PSI
- Weight - 20 kg
- Grip - 28 mm
- Sleeve diameter - 50mm
- Length - 2.20 meters
- 1.5mm Volcano Knurl
- Single International Powerlifting Knurl Mark
- 6 Bronze Bushings
- Medium Whip
Straight Barbell 5ft (Black OxideChrome)
Enhance your arm and shoulder workouts with the pinnacle of quality: our premium 5-foot straight bar. Specifically tailored for commercial fitness facilities, the straight bar 5ft is meticulously designed to facilitate exercises like overhead shoulder presses, bicep curls, triceps extensions, and more. Its 5-foot length is meticulously optimised for both space and cost, offering a practical alternative to the traditional 7-foot bar. However, home users and beginners can also benefit from this bar for a variety of lifts, making it a versatile addition to any workout regimen.
It comprises of the TESIRO unique ball bearing system with 4NK Needle Ball Bearings for smooth rotation while lifting. This bar is our incredible deal for CrossFit boxes, Conventional gyms and Olympic weightlifting gyms.
- Strength rating at 190,000 PSI
- Black Oxide Finish
- Weight - 12.5 kg
- Grip - 28 mm
- Sleeve diameter - 50mm
- Length - 1.52 meters
- 1.2mm Diamond Knurl
- 4NK Needle Bearings
- No Whip
TFB02 Color Rubber Bumper Plates
TESIRO PLATES
Made to IWF Olympic standards, our Olympic Bumper Plates are commercial quality. They’re engineered for serious functional fitness use, and have been tested to withstand over 9,000 stops onto hard flooring, making them reliable and durable.
Depending on the weight, the plate thickness changes. However, all plates comply with IWF standards, and have a hole diameter of 2 inches (or 50.8mm).
Coated in high-quality rubber, the plates also feature an embossed TESIRO logo and the plate weight on both sides. These plates are idea for indoor home gyms or garage gyms, as well as competition Olympic lifting, strength training and functional fitness.
Bumper Plate Coating: Color rubber embossed with logo and plate weight.
Bumper Plate Hole Diameter: 2 inches, or 50.8 millimeters – suits Olympic-standard Barbells.
Inner cover: Hibernated stainless steel.
Bumper Plate Size: 450mm length by 450mm height. See below for width.
Bumper Plate Width:
5KG 24MM
10KG 44MM
15KG 64MM
20KG 81MM
25KG 97MM
TFB03 Competition Rubber Bumper Plates
Elevate Your Weightlifting Routine with Tesiro Fitness Olympic Competition Bumper Plates.
Crafted to meet the rigorous specifications and standards set by international weightlifting federations, these plates are designed for competitive Olympic weightlifting and precise training protocols.
Our Olympic Competition Bumper Plates offer several key advantages. They are engineered to minimize bounce, providing a stable lifting platform. With their thinner plate widths, you can load more plates onto your barbell, maximizing your training potential. These plates adhere to strict weight tolerance guidelines, ensuring accuracy within +/- 10g of their assigned weight.
Benefits:
Suitable for all Olympic barbells
Meets all of the international weightlifting federations specifications and standards
Stainless steel inserts
Thinner plate widths to allow additional barbell loading
Attractive appearance
Weight tolerance is +/- 10g of the designated weight
Minimal bounce
Sold Singly
Plate type: Competition
Materials: Rubber & Steel
Diameter: 450mm
Collar Opening: 50mm
Plate thickness:
5kg – 22mm
10kg – 32mm
15kg – 42mm
20kg – 52mm
25kg – 63mm
TFB05 Hi Temp Bumper Plates
Description
Made from recycled rubber, the Tesiro Hi-Temp bumper plates can withstand whatever you throw at them.
Bumper plates are ideal for functional training and Olympic weightlifting. The structure of these plates allows for efficient absorption of force when dropped from overhead.
These plates have been designed to fit seamlessly around our Olympic barbells. Olympic barbells are standardised with 50mm shaft diameters, so these plates will fit perfectly. Barbell collars should be used to create even more stability.
Key Features
50.4mm Collar opening
Olympic standard diameter (450mm)
Made from recycled rubber
Low Bounce
Extreme Durability
Gear Specs
Barbell Hole Diameter: 50.8mm
Plate Dimensions
5kg / H450 x W450 x D30mm
10kg / H450 x W450 x D55mm
15kg / H450 x W450 x D70mm
20kg / H450 x W450 x D80