Straight Bar 4ft (Black Oxide/Chrome)
Are you passionate about sculpting your arms with the classic straight curl bar? Then ATE Straight Bar 4ft is tailor-made for you. This specialised bar is meticulously crafted to target and isolate the biceps, triceps, and forearm muscles, helping you achieve your desired arm strength and definition. Whether you’re aiming to build mass or tone your muscles, this bar provides the ideal tool to enhance your arm training regimen.
It comprises of the ATE unique ball bearing system with 2 Needle Ball Bearings for smooth rotation while lifting. This bar is our incredible deal for CrossFit boxes, Conventional gyms and Olympic weightlifting gyms.
- Strength rating at 45,000 PSI
- Black Oxide Finish
- Weight – 10 kg
- Grip – 28 mm
- Sleeve diameter – 50mm
- Length – 1.20 meters
- 1.2mm Diamond Knurl
- 2 Needle Bearings
- No Whip
相关产品
Fractional Plates
Fractional plates, also referred to as micro plates or change plates, are used for making small increments in lifts to accumulate small and consistent weight gains.
Available in five different increments from 0.5kg to 2.5kg, these are essential for incrementing load and to help you hit your percentages with accuracy. With smooth raised edges to protect and preserve your quality bumpers and bars, our Fractional Plates fit perfectly with your existing plates.
SPECIFICATIONS
Weight 0.5KG, 1KG, 1.5KG, 2KG, 2.5KG
Material Rubber
Color Various
Olympic Barbell Weightlifting Eagle Bar 20kg (Black Oxide/Chrome)
The TESIRO Eagle Barbell has a Black Oxide finish on the shaft and Hard Chrome Finish on the sleeves. Black Oxide coating is durable, rust resistant and gives a bare metal feel to the knurl. Although,
It comprises of the TESIRO unique ball bearing system with 4 HK Ball Bearings for smooth rotation while lifting. This bar is our incredible deal for CrossFit boxes, Conventional gyms and Olympic weightlifting gyms.
- Black Oxide Finish
- Strength rating at 190,000 PSI
- Weight - 20 kg
- Grip - 28 mm
- Sleeve diameter - 50mm
- Length - 2.20 meters
- 1.2mm Diamond Knurl
- Dual International Weightlifting + Powerlifting Knurl Marks
- 4 HK Needle Bearings
- Moderate Whip
Olympic Barbell Weightlifting Red Falcon 20kg (Cerakote)
The TESIRO Red Falcon Weightlifting Olympic Barbell is made from a special steel alloy. The TESIRO Red Falcon Barbell has a Cerakote Red finish on the shaft and Black Finish on the sleeves. Cerakote coating is highly durable and rust resistant. If you live in a coastal area with high humidity, the Cerakote finish is ideal for your use.
Checkout the review of the TESIRO Red Falcon Bar 20Kg here!
It comprises of the TESIRO unique ball bearing system with 10HK Ball Bearings for smooth rotation while lifting. This bar is our incredible deal for CrossFit boxes, Conventional gyms and Olympic weightlifting gyms.
- Strength rating at 200,000 PSI
- Cerakote Red Finish
- Weight - 20 kg
- Grip - 28 mm
- Sleeve diameter - 50mm
- Length - 2.20 meters
- 1.2mm Diamond Knurl
- Dual International Weightlifting + Powerlifting mark
- 10 HK Needle Bearings
- Good Whip
Olympic Weightlifting Technique Barbell 10kg (Kid’s)
TESIRO technique weightlifting barbell is ideal for beginners. Sturdy Nylon bushings and the bar's design allow sleeves to rotate freely giving the feeling of lifting with an TESIRO Olympic Weightlifting Bar. This enables a smooth transition and appropriate progressions to heavier standard weightlifting bars. Sleeves are made of anodised aluminium.
- Weight - 10 kg
- Grip - 25 mm
- Sleeve diameter - 49.8mm
- Length - 2.20 meters
- 1.0mm Mild Knurl
- Single International Weightlifting Knurl Mark
- 4 Nylon Bushings
- Low Whip
Powerlifting Barbell 20kg Stainless Steel (IPF Specifications)
Unleash more power in your lifts with the TESIRO Powerlifting Bar – Stainless Steel Edition, engineered for peak performance in deadlifts, squats, and bench presses. With an aggressive knurl and unmatched grip feel, this bar delivers the raw, tactile experience lifters crave—without the hassle of maintenance.
Key Benefits of the Stainless Steel Construction:
Rust-Free Performance: The stainless steel shaft and sleeves offer top-tier corrosion resistance, eliminating the need for frequent maintenance.
Exceptional Grip Feel: Experience a near bare-steel feel with aggressive knurling for enhanced control during heavy lifts.
High Stiffness: With a 205,000 PSI tensile strength, this bar provides the rigidity needed for serious powerlifting movements.
The 1.5mm Volcano Knurl with the IPF knurl mark makes the TESIRO Stainless Steel Powerlifting Barbell suitable for all national competitions and training. It comprises of the TESIRO signature bushing system.
- Strength rating at 205,000 PSI
- Weight - 20 kg
- Grip - 29 mm
- Sleeve diameter - 50mm
- Length - 2.20 meters
- 1.5mm Volcano Knurl
- Single IPF-5 Knurl Mark
- 6 Bronze Bushings
- No Whip
Powerlifting Barbell 20kg (IPF Specifications)
The TESIRO powerlifting barbell is made from special steel alloy. The TESIRO Powerlifting Barbell is made according to IPF Specifications and thus is used in professional powerlifting setups all over the country.
You can read the full review of the TESIRO Powerlifting Barbell 20kg India!
The 1.5mm Volcano Knurl with the IPF knurl mark makes the TESIRO Powerlifting Barbell suitable for all national competitions and training. It comprises of the TESIRO signature bushing system.
- Strength rating at 200,000 PSI
- Weight - 20 kg
- Grip - 28 mm
- Sleeve diameter - 50mm
- Length - 2.20 meters
- 1.5mm Volcano Knurl
- Single International Powerlifting Knurl Mark
- 6 Bronze Bushings
- Medium Whip
The Buffalo Bar
The straight bar is great for a lot of movements such as deadlifts, bench press etc. but when it comes to squats, a lot of people feel stress on their back with the straight bars. Introducing the TESIRO Buffalo Bar which is cambered to provide stress relief on your back and making your squats more comfortable!
The camber angle helps you maintain a neutral position while reducing stress on your shoulder bicep tendon. This increases your core stability while squatting.
Checkout the full review of the TESIRO Buffalo Bar here!
The TESIRO Buffalo bar is 7.8ft/2380MM long having a shaft diameter of 32mm and weighs 21kgs. The bar shaft is finished in black oxide finish with 1.5MM Diamond Knurl which is highly recommended for all lifting facilities. It is a staple for those squatting and bench pressing, correctly, safely, and efficiently. The sleeves are Hard Chrome to protect from oxidation and wear due to loading/unloading of the plates.
The camber in the bufallo bar reduces strain on the bicep and allows increased back rigidity while squatting which is incredibly important for strength and injury prevention. It also adds an improved ability to generate core stability due to the reduced mobility demands of the shoulders and maintain neutral back squat rack position.
- Strength rating at 190,000 PSI
- Weight - 21 kg
- Grip - 32 mm
- Sleeve diameter - 50mm
- Length - 2.38 meters
- 1.5mm Diamond Knurl
- Single International Powerlifting Knurl Mark
- Proprietary Bronze Bushings
- No Whip
The Squat Bar
A Squat bar goes beyond what's merely sufficient—it’s designed to make your heavy lifts more stable, secure, and efficient. Here's why investing in a purpose-built squat bar can elevate your training.
Our squat bar features a 32mm shaft diameter paired with aggressive full knurling, providing a larger contact surface across your upper back. This increased grip area minimizes bar slippage and enhances bar control throughout the movement—especially under heavy loads.
Crafted from ultra-stiff, whip-resistant steel, this bar is engineered for maximum stability. Its rigidity even surpasses traditional 29mm power bars, making it ideal for serious strength athletes. The 2400mm total bar length and 425mm loadable sleeves offer ample room for heavier weight plates and smoother racking, reducing distractions and improving overall confidence during lifts.
Built for powerlifters and advanced lifters, the TESIRO Squat Bar is the ultimate tool for heavy squats, delivering superior balance, bar security, and training performance.
The 1.5mm Volcano Knurl with the IPF knurl mark makes the TESIRO Squat Barbell suitable for all national competitions and training. It comprises of the TESIRO signature bushing system.
- Strength rating at 200,000 PSI
- Weight - 25 kg
- Grip - 32 mm
- Sleeve diameter - 50mm
- Length - 2.40 meters
- 1.5mm Volcano Knurl
- Single IPF-4 Knurl Mark
- 6 Bronze Bushings
- No Whip