Olympic Barbell Weightlifting Hummingbird 15kg (Cerakote)
相关产品
Fractional Plates
Fractional plates, also referred to as micro plates or change plates, are used for making small increments in lifts to accumulate small and consistent weight gains.
Available in five different increments from 0.5kg to 2.5kg, these are essential for incrementing load and to help you hit your percentages with accuracy. With smooth raised edges to protect and preserve your quality bumpers and bars, our Fractional Plates fit perfectly with your existing plates.
SPECIFICATIONS
Weight 0.5KG, 1KG, 1.5KG, 2KG, 2.5KG
Material Rubber
Color Various
Olympic Barbell Weightlifting 15kg (Women’s)
The TESIRO Weightlifting competition olympic barbell 15kg is made from a special steel alloy. The bar is built according to the IWF Specifications and comes with lifetime warranty against bending!
It comprises of the Nothing can beat the durability of the classic silver hard chrome finish and the great performance of our bar makes it an ideal choice in your professional setup. It comprises of the TESIRO unique bearing system with 8HK Needle Bearings.
- Strength rating at 200,000 PSI
- Weight - 15 kg
- Grip - 25 mm
- Sleeve diameter - 50mm
- Length - 2.01 meters
- 1.2mm Diamond Knurl
- Single International Weightlifting Knurl Mark
- Good Whip
Olympic Weightlifting Technique Barbell 10kg (Kid’s)
TESIRO technique weightlifting barbell is ideal for beginners. Sturdy Nylon bushings and the bar's design allow sleeves to rotate freely giving the feeling of lifting with an TESIRO Olympic Weightlifting Bar. This enables a smooth transition and appropriate progressions to heavier standard weightlifting bars. Sleeves are made of anodised aluminium.
- Weight - 10 kg
- Grip - 25 mm
- Sleeve diameter - 49.8mm
- Length - 2.20 meters
- 1.0mm Mild Knurl
- Single International Weightlifting Knurl Mark
- 4 Nylon Bushings
- Low Whip
Powerlifting Barbell 20kg Stainless Steel (IPF Specifications)
Unleash more power in your lifts with the TESIRO Powerlifting Bar – Stainless Steel Edition, engineered for peak performance in deadlifts, squats, and bench presses. With an aggressive knurl and unmatched grip feel, this bar delivers the raw, tactile experience lifters crave—without the hassle of maintenance.
Key Benefits of the Stainless Steel Construction:
Rust-Free Performance: The stainless steel shaft and sleeves offer top-tier corrosion resistance, eliminating the need for frequent maintenance.
Exceptional Grip Feel: Experience a near bare-steel feel with aggressive knurling for enhanced control during heavy lifts.
High Stiffness: With a 205,000 PSI tensile strength, this bar provides the rigidity needed for serious powerlifting movements.
The 1.5mm Volcano Knurl with the IPF knurl mark makes the TESIRO Stainless Steel Powerlifting Barbell suitable for all national competitions and training. It comprises of the TESIRO signature bushing system.
- Strength rating at 205,000 PSI
- Weight - 20 kg
- Grip - 29 mm
- Sleeve diameter - 50mm
- Length - 2.20 meters
- 1.5mm Volcano Knurl
- Single IPF-5 Knurl Mark
- 6 Bronze Bushings
- No Whip
Powerlifting Barbell 20kg (IPF Specifications)
The TESIRO powerlifting barbell is made from special steel alloy. The TESIRO Powerlifting Barbell is made according to IPF Specifications and thus is used in professional powerlifting setups all over the country.
You can read the full review of the TESIRO Powerlifting Barbell 20kg India!
The 1.5mm Volcano Knurl with the IPF knurl mark makes the TESIRO Powerlifting Barbell suitable for all national competitions and training. It comprises of the TESIRO signature bushing system.
- Strength rating at 200,000 PSI
- Weight - 20 kg
- Grip - 28 mm
- Sleeve diameter - 50mm
- Length - 2.20 meters
- 1.5mm Volcano Knurl
- Single International Powerlifting Knurl Mark
- 6 Bronze Bushings
- Medium Whip
Powerlifting Barbell Hercules Bar 20kg
After being demanded for our valuable customers for quite some time, we finally have a barbell which will help you reach your 1RM's! The TESIRO Hercules Barbell has a 1.5MM Volcano knurl which is aggressive, adequate stiffness and the 29mm shaft diameter is optimal for your heaviest lifts!
The shaft is Red Cerakote finish with aggressive 1.5MM Volcano Knurl which feels great in the hand even with the Cerakote finish. The sleeves are Hard Chrome to protect from oxidation and wear due to loading/unloading of the plates. The TESIRO Hercules Barbell is made from special steel alloy.
- Strength rating at 200,000 PSI
- Weight - 20 kg
- Grip - 29 mm
- Sleeve diameter - 50mm
- Length - 2.20 meters
- 1.5mm Volcano Aggressive Knurl
- Single International Powerlifting Knurl Marks
- 6 Bronze Bushings
- No Whip
Straight Bar 4ft (Black Oxide/Chrome)
Are you passionate about sculpting your arms with the classic straight curl bar? Then ATE Straight Bar 4ft is tailor-made for you. This specialised bar is meticulously crafted to target and isolate the biceps, triceps, and forearm muscles, helping you achieve your desired arm strength and definition. Whether you're aiming to build mass or tone your muscles, this bar provides the ideal tool to enhance your arm training regimen.
It comprises of the ATE unique ball bearing system with 2 Needle Ball Bearings for smooth rotation while lifting. This bar is our incredible deal for CrossFit boxes, Conventional gyms and Olympic weightlifting gyms.
- Strength rating at 45,000 PSI
- Black Oxide Finish
- Weight - 10 kg
- Grip - 28 mm
- Sleeve diameter - 50mm
- Length - 1.20 meters
- 1.2mm Diamond Knurl
- 2 Needle Bearings
- No Whip